GB/T EV Charging Cable conform to the provisions and requirements of GB/T20234.2-2015, it can charge all EV manufactured in china, correctly and effectively with high compatibility.
"Vehicle-To-Load" (V2L) refers to using the stored energy from electric vehicles high-voltage to recharge any other electric device. With the popularization of V2L technology, AG has developed this safe and efficient V2L product in combination with market changes to serve consumers all over the world.
GB/T Portable Ev Charger conform to the provisions and requirements of GB/T20234.2-2015, GB/T 18487.1-2015. And it can charge all EV manufactured in china. Customer is capable to deploy the charger indoor or outdoor, according to genuine demand. Firmly locking the charger on the setup backplane can prevent theft.
GB/T EV DC Charging Socket has beautiful appearance, and the prevention cap can be installed on the left side, the right side or the front of it.
GB/T-GB/T Charging Mode3 Cable has excellent protection performance, protection grade achieved IP55 of plug (working condition) High security.
Developed for portable DC charging pile, beautiful appearance with hand - held design and small in volume make installation easily, insertion and withdrawal conveniently.
GB/T EV DC TPU Charging Cable equipped with TPU sheath. It gives a better performance in a cold and low temperature environment.
GB/T EV AC Charging Socket use reliable material, flame retardant, pressure proof, wear-resisting, impact resistance, high oil proof.
At present, the EV charging interface standards are not untied throughout the world, and they are roughly divided into three categories: one is the American standard, one is the European standard, and the other is the China standard. According to the latest mainstream GB/T EV charging technology, DC charging (DC) standard and AC charging (AC) standard are popular ones all over the world.
The solenoid lock is used to fix the socket and anti-theft.
Ac and DC EV charging interface is different. Dc power supply is larger, and has faster charging speed. It can save time, and is suitable for short stay destination users. However, the power of ac charging is smaller, which is suitable for occasions where the charging time is not sensitive such as home EV charging or Hotel EV charging.
The products of the national standard are in line with the provisions and requirements of GB/T 20234.2-2015 connection device for conductive charging of electric vehicles. Besides GB/T, AG ELECTRICAL also has a variety range of charging interfaces and charging methods that conform to IEC and SAE standards. They are applicable for different brands of electric vehicles and charging stations.
AG ELECTRICAL use reliable materials with test of flame retardant, pressure resistance, abrasion resistance, impact resistance, high oil resistance. Safety insulation design is adopted to prevent accidental contact with human hands. The cable insulation adopts XLPO to prolong the aging life, and the sheath adopts TPU to improve the bending life of the cable.
A GB/T EV charger is an electric vehicle charging station designed and manufactured by GB/T Technologies Inc. It is a level 2 charging station that can provide up to 7.2 kW of power to charge electric vehicles.
The charging time for an electric vehicle with a GB/T EV charger depends on the battery size of your vehicle and the power output of the charging station. On average, it takes about 4-6 hours to fully charge an electric vehicle using a GB/T EV charger.
GB/T EV chargers are compatible with all electric vehicles that use a standard J1772 charging port. However, some electric vehicles may require an adapter to use with the GB/T EV charger.
English
日本語
한국어
français
Deutsch
Español
italiano
русский
Türkçe
ไทย
Latinae