As a practitioner in the electric vehicle industry, AG has always been very concerned about the development of new energy electric vehicles. After all, electric vehicles have great development prospects. Personally, if I invest in the new energy vehicle industry, I may be able to usher in rapid progress in my career.
For new energy vehicles, many potential consumers would worry that the EV charger is not perfect, and charging will be troublesome after buying EV. In fact, for a large number of people, this worry is superfluous. EV charging at home is actually very convenient. It only needs a portable charger, and the car cost is very low.
At present, AG is a brand of portable chargers of good quality on the market. The charging power of AG portable charger can reach 3.3kw. The car can be charged by directly inserting it into a household 16A socket.
Take BYD Tang 100 as an example. The total battery capacity of BYD Tang 100 is 23kwh. Calculated according to the average charging power of 3KW, the time required from the battery completely dead to fully charged in 7.6 hours (23kwh divided by 3KW equals 7.6 hours)
For example, the price of household electricity at night in China is about 0.5 yuan. The cost of BYD Tang 100 from complete power failure to full power is 0.5 * 23 = 11.5 yuan. In theory, the cost of 11.5 yuan can be enough for BYD Tang to drive 100 kilometres under pure electricity. The average cost per kilometre is only more than 10 cents.
The safety protection of portable charging cables is very important
The above AG introduced that using portable chargers for electric vehicles is the most cost-effective method, but when using a portable charger, we must pay attention to the safety performance of portable chargers.
At present, the main problems of electric charging cables are large plug-in force, wear, overheating and poor contact. The plug-in force of the charging cable is reflected on the terminal.
During the charging process, the battery shall be charged with low power when it is fully charged, and the battery shall be recharged when it is over-discharged, so as to prolong the service life of the battery. In terms of temperature control, it is necessary to achieve small current charging and battery heating in a low-temperature environment. In the high-temperature environment in summer, especially when overcharging, the temperature rises rapidly, so the charging voltage should be controlled.
These problems are the problems that portable EV charger suppliers need to solve. Therefore, there are many patented technologies involved in portable chargers. If you buy a portable charger, you must pay attention to the purchase of products with good safety performance.
Among the electric vehicle charging cable types, the AG brand electric vehicle charging cable is equipped with over-voltage and under-voltage protection, lightning protection, output short-circuit protection, leakage protection, overcurrent protection and other protection devices, and is equipped with leakage protector. In case of leakage during standby or charging, it will trip in time to protect the personal safety of customers.
One advantage of AG portable charger is that it is very easy to carry. You can put the portable charger in the car trunk at any time and take it out to charge the car as long as it is convenient.
