Using portable electric vehicle chargers is convenient, but if purchased or used improperly, it can pose safety risks. If car owners learn and master the knowledge of electric vehicle charging while using new energy vehicles, they can avoid risks during safe charging, which is also a good thing. What are the safety requirements for charging operations?
Some new car owners may think that as long as they buy a suitable portable charger, they can charge without any problems. However, if the charging instability occurs, there may be problems with the entire charging system, and the portable electric charger is just one component of the system. In home charging, the charging system usually includes an electric meter, circuit breaker, power cable, power socket, corresponding onboard charger and electric vehicle, and any component with incorrect specifications or quality problems can lead to charging failure.
In addition to a safe and reliable charging environment and portable electric vehicle chargers, correct charging operations are also crucial. If you want to purchase best portable ev charger, AG ELECTRICAL is a great option for you.
The maximum charging current when using a normal socket should not exceed 10A.
In an environment without a 16A socket, some car owners, in pursuit of fast charging, may still choose 16A charging from a normal three-hole socket. If there is no plug temperature control protection, it is very likely to burn out the power socket. Even if there is plug temperature control protection, the high temperature of the normal three-hole socket may not be fully transmitted to the temperature control plug through the adapter. The temperature control plug may not be able to make a timely power-off protection. Therefore, for safe charging, when using a normal three-hole socket to charge, the current needs to be switched to 8A or 10A.
Requirements for using extension cords
If the distance between the power supply and the vehicle when using a portable electric vehicle charger is quite far, the owner may choose to use an extension cord or a flying lead to charge. In this case, the extension cord must meet two requirements: the plug and socket must be 16A specifications; the cable specifications must reach 4 square meters or above, and must be copper wire. If these two points are not met, the charging needs to be switched to 8A or 10A.
New energy vehicles bring us a fresh travel experience, but as a new thing, it also brings quite a few challenges to travel safety. As a new energy vehicle owner, it is necessary to master and apply relevant knowledge and experience as much as possible, so that new energy vehicles can serve life more safely and reliably.